Whether you feel you can’t see good enough at night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your motor vehicle to blame – your low beams. Even though this correction may seem to be simple thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this simple manipulation, and in this article content, we will find out how to adjust the low beam lights of your Volkswagen Transporter? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Transporter.
Why set the low beam lights of your Volkswagen Transporter?
So let’s begin our article content with the point of adjusting the low beam lights of your Volkswagen Transporter. For a lot of people these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not constantly the case and looking at this setting, either because the low beams of your Volkswagen Transporter are not lighting up well, or because you have the feeling that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Volkswagen Transporter for security is a wise decision.
To start, the adjusting of the dipped headlights of an Volkswagen Transporter must be done for a simple security reason. Whether it’s for you, or for the other users you encounter during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is therefore fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Transporter for legal motives
In addition to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Transporter?
We will now go forward to the section that concerns you the most in this article content, how to adjust the low beams of his Volkswagen Transporter? This setting may appear a bit complicated, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Volkswagen Transporter
To start, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Transporter
Once your motor vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Volkswagen Transporter (they are commonly marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your Volkswagen Transporter is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Volkswagen Transporter, please browse our article content on this subject.
To get more tips on the Volkswagen Transporter, take a look at the Volkswagen Transporter category.
