It doesn’t matter if you feel you can’t see as well through the night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your automobile to blame – your low beams. Even though this adjustment may seem to be easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this simple modification, and in this content, we will find out how to adjust the low beam lights of your Volkswagen Crafter 2? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Crafter 2.
Why adjust the low beam lights of your Volkswagen Crafter 2?
So let’s start our content with the benefit of adjusting the low beam lights of your Volkswagen Crafter 2. For many people these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not constantly the case and verifying this setting, either because the low beams of your Volkswagen Crafter 2 are not lighting up well, or because you have the sense that they are too weak or too powerful is a good idea .
Adjusting the low beam of your Volkswagen Crafter 2 for security is a good idea.
First of all, the adjusting of the dipped headlights of an Volkswagen Crafter 2 must be done for a ordinary security reason. Regardless whether it’s for you, or for the other drivers you encounter during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. In contrast, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself in danger. It is consequently necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Crafter 2 for legal justifications
Furthermore to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Crafter 2?
We will now move on to the section that concerns you the most in this content, how to adjust the low beams of his Volkswagen Crafter 2? This setting may seem a bit difficult, but if you stick to the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Volkswagen Crafter 2
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure rigorously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Crafter 2
Once your automobile is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the guidelines to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Volkswagen Crafter 2 (they are in general marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, verify that the low beam setting of your Volkswagen Crafter 2 is consistent on the road, do not hesitate to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Volkswagen Crafter 2, please examine our content on this subject.
To discover more tips on the Volkswagen Crafter 2, take a look at the Volkswagen Crafter 2 category.
