Whether you feel you can’t see properly during the night, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your car to blame – your low beams. Despite the fact this correction may seem to be simple thanks to the thumbwheel on your dashboard, a full correction is much more technical than this common manipulation, and in this content page, we will see how to adjust the low beam lights of your Volkswagen Touran? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Touran.
Why adjust the low beam lights of your Volkswagen Touran?
So let’s start our content page with the benefit of adjusting the low beam lights of your Volkswagen Touran. For a lot of people these lights are good enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not always the case and examining this setting, either because the low beams of your Volkswagen Touran are not illuminating well, or because you have the feeling that they are too weak or too strong is a good plan .
Adjusting the low beam of your Volkswagen Touran for security is a good plan.
Firstly, the adjusting of the dipped headlights of an Volkswagen Touran must be done for a simple security cause. Regardless whether it’s for you, or for the other drivers you come across during your night journeys. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Touran for legal motives
Moreover to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Touran?
We will now go forward to the section that concerns you the most in this content page, how to adjust the low beams of his Volkswagen Touran? This setting may seem a bit difficult, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Volkswagen Touran
Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Touran
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Volkswagen Touran (they are usually marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Volkswagen Touran is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Volkswagen Touran, please go through our content page on this subject.
If you wish more tutorials on the Volkswagen Touran, go to our Volkswagen Touran category.
