Regardless you feel you can’t see properly at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your car to blame – your low beams. Even though this correction may look easy thanks to the thumbwheel on your dashboard, a complete correction is much more technical than this basic realignment, and in this content page, we will see how to adjust the low beam lights of your Volkswagen Polo 5? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Polo 5.
Why adjust the low beam lights of your Volkswagen Polo 5?
So let’s commence our content page with the benefit of adjusting the low beam lights of your Volkswagen Polo 5. For most of us these lights are good enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not constantly the case and checking out this setting, either because the low beams of your Volkswagen Polo 5 are not illuminating well, or because you have the feeling that they are too low or too strong is a good plan .
Adjusting the low beam of your Volkswagen Polo 5 for safety is a good plan.
Firstly, the adjusting of the dipped headlights of an Volkswagen Polo 5 must be done for a ordinary safety reason. It doesn’t matter if it’s for you, or for the other drivers you come across during your night journeys. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. On the flip side, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence necessary for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Polo 5 for legal justifications
Moreover to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Polo 5?
We will now move on to the section that interests you the most in this content page, how to adjust the low beams of his Volkswagen Polo 5? This setting may seem a bit complex, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Volkswagen Polo 5
Firstly, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Polo 5
Once your car is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the task here are the guidelines to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Volkswagen Polo 5 (they are in general marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Volkswagen Polo 5 is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Volkswagen Polo 5, please browse our content page on this subject.
If you wish more tutorials on the Volkswagen Polo 5, go to our Volkswagen Polo 5 category.
