Regardless whether you feel you can’t see good enough after dark, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your motor vehicle to blame – your low beams. Despite the fact this correction may appear easy to do thanks to the thumbwheel on your dashboard, a full correction is much more technical than this simple realignment, and in this content, we will discover how to adjust the low beam lights of your Volkswagen Golf 6? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Golf 6.
Why adjust the low beam lights of your Volkswagen Golf 6?
So let’s commence our content with the advantage of adjusting the low beam lights of your Volkswagen Golf 6. For most of us these lights are well enough adjusted, and it seems that they light up enough at night. However this is not necessarily the case and checking this setting, either because the low beams of your Volkswagen Golf 6 are not illuminating well, or because you have the sense that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Volkswagen Golf 6 for safety is a good plan.
First of all, the adjusting of the dipped headlights of an Volkswagen Golf 6 must be done for a simple safety purpose. Whether it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is consequently necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Golf 6 for law reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Golf 6?
We will now move on to the part that interests you the most in this content, how to adjust the low beams of his Volkswagen Golf 6? This setting may appear to be a bit complex, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Volkswagen Golf 6
Firstly, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Golf 6
Once your motor vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Volkswagen Golf 6 (they are almost always marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, check that the low beam setting of your Volkswagen Golf 6 is consistent on the road, do not hesitate to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Volkswagen Golf 6, please go through our content on this subject.
Whenever you have any additional questions about the Volkswagen Golf 6, do not hesitate to consult our Volkswagen Golf 6 category.
