Regardless you feel you can’t see properly after dark, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your car to blame – your low beams. Although this adjustment may seem to be simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this ordinary modification, and in this document, we will discover how to adjust the low beam lights of your Suzuki Swift? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Suzuki Swift.


Why adjust the low beam lights of your Suzuki Swift?

So let’s commence our document with the benefit of adjusting the low beam lights of your Suzuki Swift. For most of us these lights are well enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not automatically the case and verifying this setting, either because the low beams of your Suzuki Swift are not illuminating well, or because you have the feeling that they are too weak or too strong is a wise decision .

Adjusting the low beam of your Suzuki Swift for security is a wise decision.

To begin, the adjusting of the dipped headlights of an Suzuki Swift must be done for a ordinary security cause. Regardless whether it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. In contrast, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is consequently essential for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Suzuki Swift for legal justifications

Furthermore to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Suzuki Swift?

We will now move on to the section that interests you the more in this document, how to adjust the low beams of his Suzuki Swift? This setting may appear a bit complicated, but if you stick to the instructions you should be able to do it without too much difficulty.

Preparations to set the low beam of a Suzuki Swift

Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure cautiously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the car, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Suzuki Swift

Once your car is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to stick to:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Suzuki Swift (they are in most cases marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once complete, examine that the low beam setting of your Suzuki Swift is consistent on the road, do not hesitate to examine that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your Suzuki Swift, please go through our document on this subject.

To get more tips on the Suzuki Swift, take a look at the Suzuki Swift category.