It doesn’t matter if you feel you can’t see as well at nighttime, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your motor vehicle to blame – your low beams. Although this adjustment may look easy to do thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this common realignment, and in this content page, we will discover how to adjust the low beam lights of your Suzuki Alto? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Suzuki Alto.
Why set the low beam lights of your Suzuki Alto?
So let’s start our content page with the advantage of adjusting the low beam lights of your Suzuki Alto. For most people these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not automatically the case and verifying this setting, either because the low beams of your Suzuki Alto are not lighting up well, or because you have the sense that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Suzuki Alto for security is a wise decision.
To start, the adjusting of the dipped headlights of an Suzuki Alto must be done for a simple security purpose. Regardless it’s for you, or for the other users you come across during your night journeys. In fact, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. Alternatively, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is as a consequence important for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Suzuki Alto for legal motives
Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Suzuki Alto?
We will now go forward to the section that concerns you the most in this content page, how to adjust the low beams of his Suzuki Alto? This setting may appear a bit complex, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Suzuki Alto
To start, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Suzuki Alto
Once your motor vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the guidelines to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Suzuki Alto (they are usually marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, check that the low beam setting of your Suzuki Alto is consistent on the road, do not be reluctant to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Suzuki Alto, please examine our content page on this subject.
In the event that you have any further questions about the Suzuki Alto, do not hesitate to consult our Suzuki Alto category.
