It doesn’t matter if you feel you can’t see as well at night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your car to blame – your low beams. Despite the fact this correction may look easy to do thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this common manipulation, and in this article content, we will discover how to adjust the low beam lights of your Renault Clio 4? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Clio 4.
Why adjust the low beam lights of your Renault Clio 4?
So let’s start our article content with the point of adjusting the low beam lights of your Renault Clio 4. For most people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not constantly the case and checking out this setting, either because the low beams of your Renault Clio 4 are not lighting up well, or because you have the sense that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Renault Clio 4 for safety is a wise decision.
First of all, the adjusting of the dipped headlights of an Renault Clio 4 must be done for a simple safety purpose. Regardless whether it’s for you, or for the other users you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. On the other hand, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence crucial for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Renault Clio 4 for law reasons
Moreover to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Renault Clio 4?
We will now move on to the part that concerns you the most in this article content, how to adjust the low beams of his Renault Clio 4? This setting may sound a bit complicated, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Renault Clio 4
First of all, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Renault Clio 4
Once your car is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Renault Clio 4 (they are generally marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, verify that the low beam setting of your Renault Clio 4 is consistent on the road, do not be reluctant to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Renault Clio 4, please read our article content on this subject.
If perhaps you have any further questions about the Renault Clio 4, do not hesitate to consult our Renault Clio 4 category.
