Regardless you feel you can’t see good enough after dark, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your vehicle to blame – your low beams. Even though this adjustment may seem to be simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this common manipulation, and in this document, we will find out how to adjust the low beam lights of your Peugeot Rcz? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot Rcz.
Why set the low beam lights of your Peugeot Rcz?
So let’s commence our document with the advantage of adjusting the low beam lights of your Peugeot Rcz. For the majority of us these lights are good enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not always the case and checking this setting, either because the low beams of your Peugeot Rcz are not lighting up well, or because you have the feeling that they are too low or too strong is a good option .
Adjusting the low beam of your Peugeot Rcz for security is a good option.
First of all, the adjusting of the dipped headlights of an Peugeot Rcz must be done for a simple security reason. It doesn’t matter if it’s for you, or for the other users you come across during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to anticipate a curve badly. On the flip side, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is consequently fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Peugeot Rcz for legal reasons
Additionally to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot Rcz?
We will now go forward to the part that interests you the more in this document, how to adjust the low beams of his Peugeot Rcz? This setting may seem to be a bit difficult, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Peugeot Rcz
To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot Rcz
Once your vehicle is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the simple steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Peugeot Rcz (they are in general marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Peugeot Rcz is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Peugeot Rcz, please go through our document on this subject.
To discover more tips on the Peugeot Rcz, take a look at the Peugeot Rcz category.
