Regardless whether you feel you can’t see as well after dark, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your automobile to blame – your low beams. Even though this correction may look easy thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this basic realignment, and in this article content, we will discover how to adjust the low beam lights of your Peugeot Partner? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot Partner.
Why set the low beam lights of your Peugeot Partner?
So let’s commence our article content with the point of adjusting the low beam lights of your Peugeot Partner. For many people these lights are good enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not always the case and looking at this setting, either because the low beams of your Peugeot Partner are not illuminating well, or because you have the sense that they are too weak or too strong is a good idea .
Adjusting the low beam of your Peugeot Partner for safety is a good idea.
First of all, the adjusting of the dipped headlights of an Peugeot Partner must be done for a elementary safety cause. Whether it’s for you, or for the other users you encounter during your night journeys. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Peugeot Partner for legal justifications
Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot Partner?
We will now go forward to the section that interests you the most in this article content, how to adjust the low beams of his Peugeot Partner? This setting may appear to be a bit complex, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Peugeot Partner
Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot Partner
Once your automobile is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Peugeot Partner (they are commonly marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your Peugeot Partner is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Peugeot Partner, please read our article content on this subject.
To find more tips on the Peugeot Partner, take a look at the Peugeot Partner category.
