Regardless whether you feel you can’t see as well after dark, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your car to blame – your low beams. Although this correction may appear simple thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this basic modification, and in this article, we will find out how to adjust the low beam lights of your Peugeot Expert Tepee? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot Expert Tepee.
Why set the low beam lights of your Peugeot Expert Tepee?
So let’s commence our article with the benefit of adjusting the low beam lights of your Peugeot Expert Tepee. For the majority of us these lights are well enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not constantly the case and looking at this setting, either because the low beams of your Peugeot Expert Tepee are not illuminating well, or because you have the sense that they are too low or too powerful is a good idea .
Adjusting the low beam of your Peugeot Expert Tepee for safety is a good idea.
To begin, the adjusting of the dipped headlights of an Peugeot Expert Tepee must be done for a elementary safety cause. Regardless whether it’s for you, or for the other drivers you come across during your night journeys. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Peugeot Expert Tepee for legal justifications
Moreover to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot Expert Tepee?
We will now go forward to the part that concerns you the most in this article, how to adjust the low beams of his Peugeot Expert Tepee? This setting may seem a bit complicated, but if you follow the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Peugeot Expert Tepee
Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot Expert Tepee
Once your car is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Peugeot Expert Tepee (they are in general marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, check that the low beam setting of your Peugeot Expert Tepee is consistent on the road, do not be reluctant to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Peugeot Expert Tepee, please browse our article on this subject.
If perhaps you have any additional questions about the Peugeot Expert Tepee, do not hesitate to consult our Peugeot Expert Tepee category.
