Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle responsible – your headlights, as well often known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Peugeot Expert Tepee? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot Expert Tepee.
Why adjust the headlights of your Peugeot Expert Tepee?
So let’s begin our article with the interest of adjusting the headlights of your Peugeot Expert Tepee. For many of us, our headlights are adjusted good enough, and they appear to light up enough through the night. Sadly this is not always the case and looking at this setting, either because the headlights on your Peugeot Expert Tepee are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Peugeot Expert Tepee for safety
To begin with, the headlight adjustment of a Peugeot Expert Tepee must be achieved for a basic safety motive. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you pass a car, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Peugeot Expert Tepee . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Peugeot Expert Tepee for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot Expert Tepee?
We will now proceed to the section that concerns you the most in this article, how to adjust the headlights of his Peugeot Expert Tepee? This adjustment may seem a bit complex, but by following the guidance you should be able to complete it without too much problem.
Preparations to adjust the headlights of a Peugeot Expert Tepee
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot Expert Tepee
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Peugeot Expert Tepee (they are generally marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Peugeot Expert Tepee is logical, do not think twice to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Peugeot Expert Tepee, please read our article on this subject matter.
To find more tips on the Peugeot Expert Tepee, take a look at the Peugeot Expert Tepee category.
