Whether you feel you can’t see properly after dark, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your car to blame – your low beams. Although this adjustment may look simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this basic realignment, and in this content page, we will find out how to adjust the low beam lights of your Bmw Serie 6? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Bmw Serie 6.

set-low-beam-headlights-bmw-serie-6

Why set the low beam lights of your Bmw Serie 6?

So let’s start our content page with the benefit of adjusting the low beam lights of your Bmw Serie 6. For many people these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not automatically the case and looking at this setting, either because the low beams of your Bmw Serie 6 are not illuminating well, or because you have the feeling that they are too low or too powerful is a wise decision .

Adjusting the low beam of your Bmw Serie 6 for security is a wise decision.

To begin, the adjusting of the dipped headlights of an Bmw Serie 6 must be done for a elementary security purpose. Regardless whether it’s for you, or for the other drivers you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. In contrast, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is subsequently imperative for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Bmw Serie 6 for legal reasons

In addition to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Bmw Serie 6?

We will now go forward to the part that interests you the most in this content page, how to adjust the low beams of his Bmw Serie 6? This setting may appear to be a bit complex, but if you follow the recommendations you should be able to do it without too much problem.

Preparations to set the low beam of a Bmw Serie 6

First of all, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure precisely.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the car, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Bmw Serie 6

Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to follow:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Bmw Serie 6 (they are usually marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or anything else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once done, examine that the low beam setting of your Bmw Serie 6 is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your Bmw Serie 6, please read our content page on this subject.

If you have any additional questions about the Bmw Serie 6, do not hesitate to consult our Bmw Serie 6 category.