Regardless you feel you can’t see properly through the night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your automobile to blame – your low beams. Although this adjustment may look easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic modification, and in this content page, we will find out how to adjust the low beam lights of your Peugeot 607? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot 607.
Why adjust the low beam lights of your Peugeot 607?
So let’s commence our content page with the advantage of adjusting the low beam lights of your Peugeot 607. For the majority of us these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not constantly the case and looking at this setting, either because the low beams of your Peugeot 607 are not illuminating well, or because you have the feeling that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Peugeot 607 for security is a good plan.
Firstly, the adjusting of the dipped headlights of an Peugeot 607 must be done for a elementary security cause. Regardless it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is consequently important for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Peugeot 607 for law justifications
Furthermore to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot 607?
We will now go forward to the part that concerns you the more in this content page, how to adjust the low beams of his Peugeot 607? This setting may appear a bit difficult, but if you stick to the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Peugeot 607
Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot 607
Once your automobile is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Peugeot 607 (they are generally marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, check that the low beam setting of your Peugeot 607 is consistent on the road, do not be reluctant to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Peugeot 607, please go through our content page on this subject.
To find more tips on the Peugeot 607, take a look at the Peugeot 607 category.
