Regardless whether you feel you can’t see properly through the night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your motor vehicle to blame – your low beams. Even though this correction may look easy to do thanks to the thumbwheel on your dashboard, a complete correction is much more complicated than this common modification, and in this content, we will find out how to adjust the low beam lights of your Peugeot Boxer? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot Boxer.
Why set the low beam lights of your Peugeot Boxer?
So let’s commence our content with the point of adjusting the low beam lights of your Peugeot Boxer. For many of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not constantly the case and looking at this setting, either because the low beams of your Peugeot Boxer are not illuminating well, or because you have the sense that they are too low or too strong is a good plan .
Adjusting the low beam of your Peugeot Boxer for safety is a good plan.
To begin, the adjusting of the dipped headlights of an Peugeot Boxer must be done for a simple safety cause. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night journeys. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. On the other hand, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is as a consequence imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Peugeot Boxer for law motives
Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot Boxer?
We will now go forward to the section that interests you the more in this content, how to adjust the low beams of his Peugeot Boxer? This setting may seem to be a bit complex, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Peugeot Boxer
Firstly, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure rigorously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot Boxer
Once your motor vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Peugeot Boxer (they are in general marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your Peugeot Boxer is consistent on the road, do not hesitate to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Peugeot Boxer, please go through our content on this subject.
If you want more guides on the Peugeot Boxer, go to our Peugeot Boxer category.
