No matter if it’s for your personal safety, for roadworthiness tests or to avoid a fine, ensuring that your turn signal bulbs are always functioning is imperative. In fact, bulbs are wearing parts that will inevitably burn out with time and consequently need to be replaced. You’re probably on this website because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you Peugeot 607, we’ve written and published this article to help you do it by yourself without having to go to your mechanic. To begin , we will examine examining a burnt-out rear turn signal bulb on your Peugeot 607 and in a second step, how to replace the rear turn signal bulb on your Peugeot 607.

change-rear-turn-bulb-peugeot-607

How to find out if the rear turn signal bulb on your Peugeot 607 is burnt-out or needs to be changed?

When you drive your car you don’t always have the possibility to check all the safety features of your Peugeot 607. In fact, you are more often than not in a hurry and tend to get into your car, make your journey and put it down right away without taking the time to do an occasional check-up. It is as a result important to make the effort to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Peugeot 607, but you didn’t notice it. Here are the two ordinary methods to check if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:

  • When you stop, turn on the ignition on your Peugeot 607, then alternately turn on your left and right rear turn signals and get out of the car to check that they are working.
  • By listening to the sound of your turn signals. In actual fact, there is an audible warning on each car that notifies you of a rear turn signal bulb burnt out on your Peugeot 607, you will recognise that the time between each “click” is much shorter, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first methodology shown above.

You may have another bulb to replace, like the one of your low beam Peugeot 607 or your position lights on Peugeot 607, don’t hesitate to browse our content articles to help you to complete this replacing.

Replacing the rear turn signal bulb on my Peugeot 607

Now let’s go to the most important step of this content page, how to replace the rear turn signal bulb on Peugeot 607? Please be aware that this procedure is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Peugeot 607, see our dedicated article. However, here are the full description to adhere to in order to complete this act correctly:

  • To access the tail light assembly, take out the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take off the rear indicator bulb from your burnt-out turn signal that you have sooner recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
  • Replace the rear turn signal bulb on your Peugeot 607. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
  • .

  • Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working properly

Whenever you have any further questions about the Peugeot 607, do not hesitate to consult our Peugeot 607 category.