It doesn’t matter if you feel you can’t see properly after dark, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your automobile to blame – your low beams. Despite the fact this adjustment may appear easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this common manipulation, and in this content page, we will find out how to adjust the low beam lights of your Peugeot 108? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot 108.
Why adjust the low beam lights of your Peugeot 108?
So let’s commence our content page with the benefit of adjusting the low beam lights of your Peugeot 108. For the majority of us these lights are good enough adjusted, and it seems that they light up enough at night. However this is not always the case and verifying this setting, either because the low beams of your Peugeot 108 are not lighting up well, or because you have the sense that they are too low or too powerful is a good plan .
Adjusting the low beam of your Peugeot 108 for safety is a good plan.
To start, the adjusting of the dipped headlights of an Peugeot 108 must be done for a basic safety reason. It doesn’t matter if it’s for you, or for the other users you encounter during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is as a consequence important for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Peugeot 108 for legal motives
Furthermore to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot 108?
We will now go forward to the section that interests you the most in this content page, how to adjust the low beams of his Peugeot 108? This setting may seem a bit difficult, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Peugeot 108
To start, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot 108
Once your automobile is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Peugeot 108 (they are in general marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, verify that the low beam setting of your Peugeot 108 is consistent on the road, do not hesitate to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Peugeot 108, please examine our content page on this subject.
Whenever you have any further questions about the Peugeot 108, do not hesitate to consult our Peugeot 108 category.
