Regardless whether you feel you can’t see as well at night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your vehicle to blame – your low beams. Although this correction may seem simple thanks to the thumbwheel on your dashboard, a whole correction is much more complex than this common realignment, and in this content page, we will see how to adjust the low beam lights of your Peugeot 207? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot 207.
Why set the low beam lights of your Peugeot 207?
So let’s commence our content page with the advantage of adjusting the low beam lights of your Peugeot 207. For a lot of people these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not necessarily the case and looking at this setting, either because the low beams of your Peugeot 207 are not illuminating well, or because you have the feeling that they are too low or too strong is a wise decision .
Adjusting the low beam of your Peugeot 207 for security is a wise decision.
To begin, the adjusting of the dipped headlights of an Peugeot 207 must be done for a elementary security purpose. Regardless it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. On the flip side, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is as a consequence essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Peugeot 207 for law reasons
Furthermore to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot 207?
We will now move on to the section that interests you the more in this content page, how to adjust the low beams of his Peugeot 207? This setting may sound a bit complicated, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Peugeot 207
Firstly, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure rigorously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot 207
Once your vehicle is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Peugeot 207 (they are commonly marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, verify that the low beam setting of your Peugeot 207 is consistent on the road, do not be reluctant to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Peugeot 207, please examine our content page on this subject.
In the event that you have any additional questions about the Peugeot 207, do not hesitate to consult our Peugeot 207 category.
