It doesn’t matter if you feel you can’t see good enough through the night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your vehicle to blame – your low beams. Even though this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic modification, and in this article content, we will find out how to adjust the low beam lights of your Nissan Pulsar? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Nissan Pulsar.
Why set the low beam lights of your Nissan Pulsar?
So let’s commence our article content with the advantage of adjusting the low beam lights of your Nissan Pulsar. For most of us these lights are good enough adjusted, and it looks like that they light up enough at night. However this is not always the case and looking at this setting, either because the low beams of your Nissan Pulsar are not lighting up well, or because you have the feeling that they are too low or too strong is a good idea .
Adjusting the low beam of your Nissan Pulsar for safety is a good idea.
Firstly, the adjusting of the dipped headlights of an Nissan Pulsar must be done for a simple safety purpose. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is consequently necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Nissan Pulsar for law reasons
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Nissan Pulsar?
We will now go forward to the part that concerns you the more in this article content, how to adjust the low beams of his Nissan Pulsar? This setting may appear to be a bit complicated, but if you follow the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Nissan Pulsar
To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Nissan Pulsar
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the guidelines to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Nissan Pulsar (they are generally marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Nissan Pulsar is consistent on the road, do not hesitate to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Nissan Pulsar, please browse our article content on this subject.
If you have any additional questions about the Nissan Pulsar, do not hesitate to consult our Nissan Pulsar category.
