Whether you feel you can’t see good enough after dark, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your automobile to blame – your low beams. Even though this correction may seem simple thanks to the thumbwheel on your dashboard, a complete correction is much more complicated than this basic realignment, and in this document, we will discover how to adjust the low beam lights of your Opel Antara? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Opel Antara.
Why adjust the low beam lights of your Opel Antara?
So let’s commence our document with the point of adjusting the low beam lights of your Opel Antara. For most people these lights are good enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not automatically the case and checking this setting, either because the low beams of your Opel Antara are not illuminating well, or because you have the sense that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Opel Antara for safety is a wise decision.
First of all, the adjusting of the dipped headlights of an Opel Antara must be done for a elementary safety purpose. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. In contrast, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is consequently essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Opel Antara for legal motives
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Opel Antara?
We will now move on to the section that interests you the most in this document, how to adjust the low beams of his Opel Antara? This setting may seem a bit complex, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Opel Antara
Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Opel Antara
Once your automobile is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Opel Antara (they are generally marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Opel Antara is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Opel Antara, please go through our document on this subject.
Whenever you have any additional questions about the Opel Antara, do not hesitate to consult our Opel Antara category.
