Whether you feel you can’t see as well at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your motor vehicle to blame – your low beams. Although this correction may seem easy to do thanks to the thumbwheel on your dashboard, a complete correction is much more technical than this basic modification, and in this content, we will find out how to adjust the low beam lights of your Opel Adam? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Opel Adam.
Why adjust the low beam lights of your Opel Adam?
So let’s start our content with the benefit of adjusting the low beam lights of your Opel Adam. For the majority of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not always the case and checking this setting, either because the low beams of your Opel Adam are not lighting up well, or because you have the sense that they are too low or too strong is a good plan .
Adjusting the low beam of your Opel Adam for security is a good plan.
First of all, the adjusting of the dipped headlights of an Opel Adam must be done for a ordinary security reason. Regardless whether it’s for you, or for the other drivers you come across during your night trips. In fact, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. In contrast, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is subsequently essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Opel Adam for law motives
Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Opel Adam?
We will now go forward to the part that interests you the most in this content, how to adjust the low beams of his Opel Adam? This setting may sound a bit complex, but if you follow the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Opel Adam
To start, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Opel Adam
Once your motor vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Opel Adam (they are almost always marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, examine that the low beam setting of your Opel Adam is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Opel Adam, please browse our content on this subject.
If you have any further questions about the Opel Adam, do not hesitate to consult our Opel Adam category.
