Regardless you feel you can’t see properly at nighttime, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your automobile to blame – your low beams. Even though this adjustment may seem to be simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this common modification, and in this article content, we will find out how to adjust the low beam lights of your Nissan Almera? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Nissan Almera.
Why set the low beam lights of your Nissan Almera?
So let’s begin our article content with the benefit of adjusting the low beam lights of your Nissan Almera. For the majority of us these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not constantly the case and checking this setting, either because the low beams of your Nissan Almera are not lighting up well, or because you have the sense that they are too weak or too strong is a good idea .
Adjusting the low beam of your Nissan Almera for safety is a good idea.
To start, the adjusting of the dipped headlights of an Nissan Almera must be done for a basic safety purpose. Regardless whether it’s for you, or for the other drivers you come across during your night trips. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to anticipate a curve badly. On the contrary, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is subsequently necessary for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Nissan Almera for law reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Nissan Almera?
We will now go forward to the part that concerns you the more in this article content, how to adjust the low beams of his Nissan Almera? This setting may seem to be a bit complex, but if you stick to the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Nissan Almera
First of all, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Nissan Almera
Once your automobile is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Nissan Almera (they are almost always marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, verify that the low beam setting of your Nissan Almera is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Nissan Almera, please read our article content on this subject.
If you need more tutorials on the Nissan Almera, go to our Nissan Almera category.
