Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle at fault – your headlights, also known as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Nissan Almera? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan Almera.
Why adjust the headlights of your Nissan Almera?
So let’s begin our article with the benefit of adjusting the headlights of your Nissan Almera. For many people, our headlights are adjusted good enough, and they appear to light up enough at night. Sadly this is not constantly the case and checking this setting, either because the headlights on your Nissan Almera are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Nissan Almera for safety
First of all, the headlight adjustment of a Nissan Almera must be finished for a simple safety explanation. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle while traveling, or to anticipate a curve badly. However, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you cross a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Nissan Almera . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Nissan Almera for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Nissan Almera?
We will now proceed to the section that concerns you the most in this post, how to adjust the headlights of his Nissan Almera? This adjustment may seem a bit complicated, but by following the instructions you should have the ability to perform it without too much issue.
Preparations to adjust the headlights of a Nissan Almera
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Nissan Almera
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical adjustment of the headlights of your Nissan Almera (they are in most cases marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Nissan Almera is logical, do not think twice to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Nissan Almera, please go through our article on this subject.
To get more tips on the Nissan Almera, take a look at the Nissan Almera category.
