It doesn’t matter if you feel you can’t see properly at night, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your motor vehicle to blame – your low beams. Despite the fact this correction may appear easy thanks to the thumbwheel on your dashboard, a complete correction is much more complicated than this common modification, and in this content page, we will see how to adjust the low beam lights of your Mercedes Classe A? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Classe A.
Why adjust the low beam lights of your Mercedes Classe A?
So let’s commence our content page with the interest of adjusting the low beam lights of your Mercedes Classe A. For a lot of people these lights are good enough adjusted, and it looks like that they light up enough at night. However this is not always the case and looking at this setting, either because the low beams of your Mercedes Classe A are not illuminating well, or because you have the feeling that they are too low or too strong is a good option .
Adjusting the low beam of your Mercedes Classe A for security is a good option.
Firstly, the adjusting of the dipped headlights of an Mercedes Classe A must be done for a basic security purpose. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is subsequently important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Mercedes Classe A for law reasons
Additionally to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mercedes Classe A?
We will now move on to the section that interests you the most in this content page, how to adjust the low beams of his Mercedes Classe A? This setting may appear a bit difficult, but if you stick to the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Mercedes Classe A
Firstly, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mercedes Classe A
Once your motor vehicle is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the guidelines to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Mercedes Classe A (they are generally marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, check that the low beam setting of your Mercedes Classe A is consistent on the road, do not hesitate to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Mercedes Classe A, please read our content page on this subject.
To find more tips on the Mercedes Classe A, take a look at the Mercedes Classe A category.
