It doesn’t matter if you feel you can’t see good enough through the night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your automobile to blame – your low beams. Despite the fact this adjustment may seem to be easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple modification, and in this article content, we will discover how to adjust the low beam lights of your Mercury Milan? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercury Milan.
Why set the low beam lights of your Mercury Milan?
So let’s commence our article content with the interest of adjusting the low beam lights of your Mercury Milan. For a lot of people these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not always the case and looking at this setting, either because the low beams of your Mercury Milan are not illuminating well, or because you have the sense that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Mercury Milan for security is a good plan.
To begin, the adjusting of the dipped headlights of an Mercury Milan must be done for a ordinary security reason. Regardless it’s for you, or for the other drivers you come across during your night journeys. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is therefore fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Mercury Milan for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mercury Milan?
We will now go forward to the section that concerns you the more in this article content, how to adjust the low beams of his Mercury Milan? This setting may appear to be a bit difficult, but if you follow the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Mercury Milan
Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mercury Milan
Once your automobile is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Mercury Milan (they are in most cases marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, examine that the low beam setting of your Mercury Milan is consistent on the road, do not be reluctant to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Mercury Milan, please read our article content on this subject.
If you need more guides on the Mercury Milan, go to our Mercury Milan category.
