It doesn’t matter if you feel you can’t see good enough after dark, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your automobile to blame – your low beams. Although this adjustment may seem to be easy to do thanks to the thumbwheel on your dashboard, a whole adjustment is much more complicated than this basic modification, and in this content page, we will find out how to adjust the low beam lights of your honda jazz? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your honda jazz.
Why adjust the low beam lights of your honda jazz?
So let’s commence our content page with the point of adjusting the low beam lights of your honda jazz. For the majority of us these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not necessarily the case and looking at this setting, either because the low beams of your honda jazz are not lighting up well, or because you have the sense that they are too weak or too strong is a wise decision .
Adjusting the low beam of your honda jazz for safety is a wise decision.
To start, the adjusting of the dipped headlights of an honda jazz must be done for a elementary safety reason. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. On the other hand, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is subsequently fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an honda jazz for legal justifications
Additionally to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a honda jazz?
We will now go forward to the section that concerns you the most in this content page, how to adjust the low beams of his honda jazz? This setting may seem a bit difficult, but if you follow the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a honda jazz
First of all, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his honda jazz
Once your automobile is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your honda jazz (they are in general marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your honda jazz is consistent on the road, do not hesitate to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your honda jazz, please browse our content page on this subject.
If perhaps you have any further questions about the honda jazz, do not hesitate to consult our honda jazz category.
