It doesn’t matter if you feel you can’t see as well after dark, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your motor vehicle to blame – your low beams. Although this correction may seem easy thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this common modification, and in this content page, we will discover how to adjust the low beam lights of your Mercedes Classe B? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Classe B.

set-low-beam-headlights-mercedes-classe-b

Why adjust the low beam lights of your Mercedes Classe B?

So let’s start our content page with the interest of adjusting the low beam lights of your Mercedes Classe B. For most people these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not constantly the case and examining this setting, either because the low beams of your Mercedes Classe B are not illuminating well, or because you have the sense that they are too low or too strong is a good plan .

Adjusting the low beam of your Mercedes Classe B for security is a good plan.

To start, the adjusting of the dipped headlights of an Mercedes Classe B must be done for a simple security cause. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night journeys. In reality, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. However, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is consequently important for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Mercedes Classe B for law reasons

In addition to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Mercedes Classe B?

We will now go forward to the part that interests you the more in this content page, how to adjust the low beams of his Mercedes Classe B? This setting may sound a bit difficult, but if you follow the instructions you should be able to do it without too much problem.

Preparations to set the low beam of a Mercedes Classe B

To start, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure cautiously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Mercedes Classe B

Once your motor vehicle is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Mercedes Classe B (they are generally marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once accomplished, verify that the low beam setting of your Mercedes Classe B is consistent on the road, do not hesitate to verify that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Mercedes Classe B, please examine our content page on this subject.

If you need more tutorials on the Mercedes Classe B, go to our Mercedes Classe B category.