Regardless whether you feel you can’t see properly after dark, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your car to blame – your low beams. Although this correction may appear easy thanks to the thumbwheel on your dashboard, a full correction is much more complex than this common realignment, and in this document, we will discover how to adjust the low beam lights of your Mercedes Cla? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Cla.
Why set the low beam lights of your Mercedes Cla?
So let’s begin our document with the advantage of adjusting the low beam lights of your Mercedes Cla. For the majority of us these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not constantly the case and looking at this setting, either because the low beams of your Mercedes Cla are not illuminating well, or because you have the sense that they are too low or too strong is a good option .
Adjusting the low beam of your Mercedes Cla for safety is a good option.
First of all, the adjusting of the dipped headlights of an Mercedes Cla must be done for a simple safety reason. Whether it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is as a consequence essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Mercedes Cla for legal justifications
Moreover to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mercedes Cla?
We will now go forward to the part that interests you the most in this document, how to adjust the low beams of his Mercedes Cla? This setting may appear a bit complex, but if you follow the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Mercedes Cla
First of all, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mercedes Cla
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Mercedes Cla (they are almost always marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, verify that the low beam setting of your Mercedes Cla is consistent on the road, do not be reluctant to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Mercedes Cla, please examine our document on this subject.
If you have any additional questions about the Mercedes Cla, do not hesitate to consult our Mercedes Cla category.
