Regardless whether you feel you can’t see properly at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your automobile to blame – your low beams. Although this correction may look simple thanks to the thumbwheel on your dashboard, a full correction is much more technical than this ordinary manipulation, and in this article content, we will discover how to adjust the low beam lights of your Mazda CX 7? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mazda CX 7.
Why adjust the low beam lights of your Mazda CX 7?
So let’s begin our article content with the interest of adjusting the low beam lights of your Mazda CX 7. For many of us these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not constantly the case and checking this setting, either because the low beams of your Mazda CX 7 are not lighting up well, or because you have the feeling that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Mazda CX 7 for security is a wise decision.
Firstly, the adjusting of the dipped headlights of an Mazda CX 7 must be done for a simple security reason. Regardless it’s for you, or for the other users you encounter during your night trips. In reality, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is as a consequence crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Mazda CX 7 for legal justifications
In addition to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mazda CX 7?
We will now move on to the part that concerns you the most in this article content, how to adjust the low beams of his Mazda CX 7? This setting may seem to be a bit complicated, but if you follow the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Mazda CX 7
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure rigorously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mazda CX 7
Once your automobile is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Mazda CX 7 (they are in general marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, verify that the low beam setting of your Mazda CX 7 is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Mazda CX 7, please browse our article content on this subject.
If you have any further questions about the Mazda CX 7, do not hesitate to consult our Mazda CX 7 category.
