Whether you feel you can’t see as well during the night, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your automobile to blame – your low beams. Even though this correction may seem simple thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this ordinary modification, and in this content, we will discover how to adjust the low beam lights of your Lexus CT? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Lexus CT.
Why set the low beam lights of your Lexus CT?
So let’s begin our content with the advantage of adjusting the low beam lights of your Lexus CT. For the majority of us these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not constantly the case and checking out this setting, either because the low beams of your Lexus CT are not lighting up well, or because you have the feeling that they are too low or too powerful is a wise decision .
Adjusting the low beam of your Lexus CT for security is a wise decision.
To begin, the adjusting of the dipped headlights of an Lexus CT must be done for a elementary security cause. Regardless it’s for you, or for the other users you come across during your night trips. In reality, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is therefore imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Lexus CT for law justifications
In addition to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Lexus CT?
We will now move on to the section that concerns you the more in this content, how to adjust the low beams of his Lexus CT? This setting may seem a bit complicated, but if you follow the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Lexus CT
To start, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Lexus CT
Once your automobile is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Lexus CT (they are almost always marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, verify that the low beam setting of your Lexus CT is consistent on the road, do not hesitate to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Lexus CT, please examine our content on this subject.
If you want more tutorials on the Lexus CT, go to our Lexus CT category.
