Among the small maintenance works that you should do regularly on your car, to fill up the brake fluid level of your Lexus CT is one of the most classics. Nevertheless this act is simple to perform, some of you are likely wanting to know why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Lexus CT? We will now answer these questions.


Advantage to always have the brake fluid level up in your Lexus CT

So we start our guideline with the significance of checking the brake fluid level on a Lexus CT. This fluid has a crucial task on your car, transmit the braking power to the wheels and thus stop your car. On the other hand, it is possible that in the long run you may lose brake fluid in the normal way (without any leakage). It is therefore necessary to check the brake fluid level of your Lexus CT regularly (every 10,000km for example). It is also advisable to flush the system every 50,000km because as time passes the brake fluid loses its properties. This operation is particularly simple and does not require advanced knowledge of mechanics, so it is easy for all Lexus CT owners to do it on their own. If the Brake light on the dashboard of your Lexus CT does not correspond to a lack of brake fluid, do not think twice to browse our guideline for details. On the other hand, there are some safety measures and rules to respect that we will see in the following part of this guideline.

How to fill up the brake fluid of a Lexus CT

So now we will learn to you how to do the brake fluid level on a Lexus CT. Please notice that this is very simple to accomplish. On the other hand, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will find this information in the user manual of your Lexus CT. Now here are the steps to stick to to make your level:

  • Open your bonnet and locate your brake fluid reservoir, it is very easy to identify, it is in general made of whitish/transparent plastic, it is based over the master cylinder (metal part) and has a yellow cap.
  • Once identified, read the instructions on the cap attentively so as not to make any problems within the the operation, we recommend you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Lexus CT up to the mark “Max”.
  • If the level was beneath the “Min” mark before you checked the brake fluid level in your Lexus CT, make sure check the level in a few days/weeks to be certain you don’t have a leak in the brake system

That’s it, you now have all the info you need to safely fill the brake fluid level of your Lexus CT.

In the event that you have any additional questions about the Lexus CT, do not hesitate to consult our Lexus CT category.