It doesn’t matter if you feel you can’t see properly at night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your vehicle to blame – your low beams. Despite the fact this correction may seem to be simple thanks to the thumbwheel on your dashboard, a complete correction is much more technical than this basic realignment, and in this article content, we will see how to adjust the low beam lights of your iveco daily? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your iveco daily.
Why set the low beam lights of your iveco daily?
So let’s commence our article content with the benefit of adjusting the low beam lights of your iveco daily. For many people these lights are good enough adjusted, and it seems that they light up enough at night. Unfortunately this is not automatically the case and looking at this setting, either because the low beams of your iveco daily are not lighting up well, or because you have the feeling that they are too low or too strong is a good option .
Adjusting the low beam of your iveco daily for security is a good option.
Firstly, the adjusting of the dipped headlights of an iveco daily must be done for a simple security cause. Whether it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is consequently essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an iveco daily for legal reasons
In addition to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a iveco daily?
We will now go forward to the section that concerns you the more in this article content, how to adjust the low beams of his iveco daily? This setting may sound a bit complicated, but if you stick to the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a iveco daily
Firstly, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure precisely.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his iveco daily
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your iveco daily (they are in general marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, examine that the low beam setting of your iveco daily is consistent on the road, do not be reluctant to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your iveco daily, please go through our article content on this subject.
To get more tips on the iveco daily, take a look at the iveco daily category.
