Regardless you feel you can’t see good enough through the night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Despite the fact this adjustment may look easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this common modification, and in this article, we will find out how to adjust the low beam lights of your hyundai i30? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your hyundai i30.
Why adjust the low beam lights of your hyundai i30?
So let’s begin our article with the advantage of adjusting the low beam lights of your hyundai i30. For many of us these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not always the case and looking at this setting, either because the low beams of your hyundai i30 are not lighting up well, or because you have the feeling that they are too low or too strong is a good plan .
Adjusting the low beam of your hyundai i30 for security is a good plan.
To begin, the adjusting of the dipped headlights of an hyundai i30 must be done for a ordinary security reason. It doesn’t matter if it’s for you, or for the other users you come across during your night journeys. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. However, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is consequently crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an hyundai i30 for law justifications
In addition to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a hyundai i30?
We will now go forward to the part that interests you the most in this article, how to adjust the low beams of his hyundai i30? This setting may appear to be a bit complex, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a hyundai i30
First of all, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his hyundai i30
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your hyundai i30 (they are in general marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, verify that the low beam setting of your hyundai i30 is consistent on the road, do not be reluctant to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your hyundai i30, please examine our article on this subject.
If you have any further questions about the hyundai i30, do not hesitate to consult our hyundai i30 category.
