Regardless you feel you can’t see good enough at night, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your car to blame – your low beams. Despite the fact this adjustment may seem to be simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple modification, and in this document, we will discover how to adjust the low beam lights of your CUPRA FORMENTOR? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your CUPRA FORMENTOR.
Why set the low beam lights of your CUPRA FORMENTOR?
So let’s begin our document with the advantage of adjusting the low beam lights of your CUPRA FORMENTOR. For many people these lights are well enough adjusted, and it seems that they light up enough at night. However this is not constantly the case and examining this setting, either because the low beams of your CUPRA FORMENTOR are not illuminating well, or because you have the feeling that they are too low or too strong is a good idea .
Adjusting the low beam of your CUPRA FORMENTOR for safety is a good idea.
To begin, the adjusting of the dipped headlights of an CUPRA FORMENTOR must be done for a simple safety purpose. Whether it’s for you, or for the other users you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. However, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is subsequently necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an CUPRA FORMENTOR for law reasons
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a CUPRA FORMENTOR?
We will now move on to the part that interests you the more in this document, how to adjust the low beams of his CUPRA FORMENTOR? This setting may appear a bit complicated, but if you follow the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a CUPRA FORMENTOR
First of all, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his CUPRA FORMENTOR
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the task here are the simple steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your CUPRA FORMENTOR (they are usually marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, verify that the low beam setting of your CUPRA FORMENTOR is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your CUPRA FORMENTOR, please examine our document on this subject.
In the event that you have any further questions about the CUPRA FORMENTOR, do not hesitate to consult our CUPRA FORMENTOR category.
