You’re tired of listening to cassettes and only having the capacity to listent to the radio, while your phone is full of your favourite tracks but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s specifically why we’ve made this article content to help you, because now you’re going to learn about how to install a car radio on your CUPRA FORMENTOR. To accomplish this, initially we will find out how to remove the old car radio, then how to install a car radio on CUPRA FORMENTOR and to finish, how to connect it.
How to install car radio on CUPRA FORMENTOR: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your CUPRA FORMENTOR, there is one essential task, remove the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two methods depending on the stereo that equips your CUPRA FORMENTOR:
- Original car radio:
In cases like this, you’ll have to be patient, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your CUPRA FORMENTOR. In fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this situation the process is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your CUPRA FORMENTOR: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your CUPRA FORMENTOR. Before you start, take the time to examine the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various actions required in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your CUPRA FORMENTOR, once installed, remember to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your CUPRA FORMENTOR, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on CUPRA FORMENTOR, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you want more tutorials on the CUPRA FORMENTOR, go to our CUPRA FORMENTOR category.
