Whether it’s raining, foggy or snowing, generally speaking, it’s usefull having fog lights on your automobile. Nevertheless, they can occasionally be out of adjustment or you may find that they are too high or too low. That’s why we had written this article content to explain to you how to adjust the fog lights on your Chrysler 300?. To achieve this, first, we will see what is the meaning of adjusting the fog lights of his vehicle, then, in an extra section, how to adjust the fog lights of your Chrysler 300.
Why is it important to adjust the front fog lights of your Chrysler 300?
So we will start our article content with the interest of adjusting the fog lights to Chrysler 300. Although some fog lights are not set and are set at the factory, you have the possibility to change their setting so that they illuminate more or less high. This devices, which is not mandatory on an Chrysler 300, permits you to greatly boost your visibility. However, it is exclusively authorized outside built-up sectors in addition to the high beam, or in heavy rain, snow or fog.
Having an optimal setting of the fog lights of its Chrysler 300 allows you not to blind and to maximise the gain in visibility that they give. Moreover, fog lights that are not effectively adjusted will undoubtedly bother the drivers you cross and may increase the risk of an accident. It is therefore fundamental, both for you and other users, that you have your fog lights correctly adjusted.
How to adjust the fog lights of your Chrysler 300?
Now let’s move on to the part you’re probably most interested in in this article content, namely how to adjust the fog lights on your Chrysler 300? Now that you have realized the interest of this adjustment, which may seem trivial, let’s move on to the practical part.
Adjusting the fog lights is extremely basic, here are a few techniques to follow to do it optimally:
- Empty your vehicle, check the pressure of your tires and, set only one person (about 70kg) in the driver’s seat which will simulate an empty weight of your Chrysler 300.
- Place your vehicle on a flat surface with a clean wall in front of you, preferably between 5 and 10 meters from it.
- Measure the height from the ground to the top of your fog lamp (on your Chrysler 300), write this distance on the wall in front of your car and mark it with a construction tape for example.
- Switch on the fog lights on your Chrysler 300 and verify that the beam of the lights is less than or equal to the mark you just marked on the wall.
- If they illuminate higher than this mark, through the engine compartment you will have to use the adjustment screws to lower the lighting of your fog lights (these screws are generally placed above your fog lights, you should find them very easily, they will be more or less accessible according to the year and the options of your Chrysler 300)
.
Now you know how to adjust the fog lights on your Chrysler 300, don’t forget to check it from time to time if you have the impression that they are not anymore illuminating properly, don’t hesitate to consult our article content on how to adjust the low beam lights on Chrysler 300 if you want to check their lighting level.
To find more tips on the Chrysler 300, take a look at the Chrysler 300 category.
