Car mirrors are one of the most crucial security features that you have to always ensure that are operating properly, because it is your safety, the safety of other motorists and your finances because you can be fined if you have a malfunctioning side mirror. This is the case that interests us today, you have endured a collision, one of your side mirrors is damaged and you are now wanting to know how to change a side mirror on your Dodge Caliber? You are at the best place, we will describe all the methods to help you change it properly. To begin, we’ll take a look at what attracts you in this article, how to change a complete side mirror on your Dodge Caliber, and then how to change only the mirror glass.
How to change a complete side mirror on my Dodge Caliber?
Let’s go, we begin this guide with the part that most probably concerns you the most, how to change a side mirror on my Dodge Caliber? This process is fairly simple and you should be able to do it without help with a minimum of tooling. You will just need to take off the plastic cover inside your car’s interior, it is in general clipped on the door. For power mirrors, remember to unplug the power connector that you will see in back of the cover. Finally, you will have to unscrew the screws that hold the mirror, in general there are three, a simple screwdriver should do the trick to allow you to complete this step of changing the side mirror of your Dodge Caliber. Make sure to keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not drop out. Finally to install your new side mirror, you will just have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and to finish reposition the plastic cover. That’s it, you’ve just learned how to change the side mirror of your Dodge Caliber, you know now that it wasn’t that complicated.
How do you just change the window of the side mirror of my Dodge Caliber?
In the event that you simply want to change the window of the side mirror of your Dodge Caliber, you will first need to discern the type of locking of your mirror. To do this, the most basic methodology is to take a look at the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you want to change the side mirror glass of your Dodge Caliber and it uses a tongue and groove system, you are fortunate people, it is the most simple device to take off. All you have to do is to use a plastic object to take off the window “by force”.
- To put it back in place, do the same and push it back right into place with force. To verify that it is perfectly installed, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to change the side mirror glass of your Dodge Caliber you will have to find the locking spring, turn the glass in the opposite way to give you access to it, disassemble it.
- Make sure to keep the spring because it is possible that you have not one supplied it with your new window, change it on your new window, dismantle the old one paying attention to the electric cables in case there is defrosting system
.
- Go along with the positioning guide (notch) and softly push it into its housing so as not to break it. Check that it is well installed by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can locate the location of the swivel plate of the window to be changed on the side mirror of your Dodge Caliber, in most cases it is at the bottom behind the window
.
- Turn the glass in the opposite way to give you much easier access to the device and using a screwdriver, rotate the mechanism.
- If your mirror is built with a defrosting system, do the reverse procedure to reattach it and check that it is perfectly fixed.
If perhaps you have any further questions about the Dodge Caliber, do not hesitate to consult our Dodge Caliber category.
