Car mirrors are one of the most crucial safety features that you have to constantly be sure are functioning correctly, because it is your safety, the safety of other road users and your budget because you can be fined if you have a malfunctioning side mirror. This is the case we will focus on in this article, you have endured a collision, one of your side mirrors is ruined and you are now wondering how to change a side mirror on your Toyota 4Runner? You are at the best place, we will explain all the procedures to help you change it properly. First of all, we’ll take a look at what attracts you on this page, how to change a complete side mirror on your Toyota 4Runner, and then how to change only the mirror glass.
How to change a complete side mirror on my Toyota 4Runner?
Let’s go, we commence this guide with the part that most certainly interests you the most, how to change a side mirror on my Toyota 4Runner? This process is quite simple and you should be capable to do it without help with a minimum of tooling. You will just need to take out the plastic cover inside your car’s interior, it is usually clipped on the door. For power mirrors, remember to unplug the power connector that you will see at the rear of the cover. Finally, you will have to unscrew the screws that hold the mirror, usually there are three, a simple screwdriver should do the trick to let you to pass this step of changing the side mirror of your Toyota 4Runner. Make sure you keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not fall out. At last to install your new side mirror, you will just have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and to finish reposition the plastic cover. That’s it, you’ve just learned how to change the side mirror of your Toyota 4Runner, you see it wasn’t that complicated.
How do you just change the window of the side mirror of my Toyota 4Runner?
In the event you just wish to change the window of the side mirror of your Toyota 4Runner, you will first need to discern the type of locking of your mirror. To accomplish this, the easiest procedure is to take a look at the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you wish to change the side mirror glass of your Toyota 4Runner and it uses a tongue and groove system, you are lucky, it is the easiest device to take out. All you have to do is to use a plastic thing to take out the window “by force”.
- To put it back in place, do the same thing and push it back into place with force. To check that it is perfectly positioned, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to change the side mirror glass of your Toyota 4Runner you will have to locate the locking spring, turn the glass in the opposite direction to give you access to it, disassemble it.
- Make sure you keep the spring because it is possible that you have not one supplied it with your new window, change it on your new window, take apart the old one paying attention to the electric cables in the event of defrosting system
.
- Go along with the positioning guide (notch) and smoothly push it into its housing so as not to break it. Verify that it is well positioned by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can locate the position of the swivel plate of the window to be changed on the side mirror of your Toyota 4Runner, most of the time it is at the bottom behind the window
.
- Turn the glass in the opposite direction to give you less complicated access to the device and using a screwdriver, rotate the mechanism.
- If your mirror is built with a defrosting system, do the reverse operation to reattach it and check that it is perfectly fixed.
To find more tips on the Toyota 4Runner, take a look at the Toyota 4Runner category.
