If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car to take responsibility – your headlights, as well named high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Chevrolet Spark? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Chevrolet Spark.
Why adjust the headlights of your Chevrolet Spark?
So let’s start our content with the benefit of adjusting the headlights of your Chevrolet Spark. For most of us, our headlights are adjusted sufficiently, and they seem to light up enough after dark. However this is not always the circumstance and checking this setting, either because the headlights on your Chevrolet Spark are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Chevrolet Spark for safety
To begin with, the headlight adjustment of a Chevrolet Spark must be made for a simple safety motive. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you pass a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Chevrolet Spark . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Chevrolet Spark for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Chevrolet Spark?
We will now move on to the section that interests you the most in this article, how to adjust the headlights of his Chevrolet Spark? This adjustment may seem a bit difficult, but by following the instructions you should be able to accomplish it without too much trouble.
Preparations to adjust the headlights of a Chevrolet Spark
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Chevrolet Spark
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical control of the headlights of your Chevrolet Spark (they are generally designated, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Chevrolet Spark is logical, do not think twice to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Chevrolet Spark, please browse our content on this subject.
If you wish more guides on the Chevrolet Spark, go to our Chevrolet Spark category.
