Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle responsible – your headlights, also known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this article, we are going to see how to adjust the headlights of your Audi S5? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Audi S5.
Why adjust the headlights of your Audi S5?
So let’s start our content page with the benefit of adjusting the headlights of your Audi S5. For many people, our headlights are adjusted good enough, and they appear to light up enough during the night. However this is not constantly the circumstance and looking at this setting, either because the headlights on your Audi S5 are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Audi S5 for safety
To begin with, the headlight adjustment of a Audi S5 must be made for a very easy security reason. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle while traveling, or to predict a curve badly. Alternatively, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you cross a vehicle, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Audi S5 . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Audi S5 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Audi S5?
We will now go forward to the section that interests you the most in this article, how to adjust the headlights of his Audi S5? This setting may appear a bit complicated, but by following the guidance you should be able to do it without too much concern.
Preparations to adjust the headlights of a Audi S5
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Audi S5
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your Audi S5 (they are usually marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Audi S5 is logical, do not hesitate to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Audi S5, please read our content page on this subject matter.
If perhaps you have any additional questions about the Audi S5, do not hesitate to consult our Audi S5 category.
