We will try again in this article to help you to remedy the small complications associated with your motor vehicle. We have not too long ago seen how to unblock a fuel door, or a tank cap, in this article we will focus on an irritating problem that can be dangerous in bad weather conditions, being a victim of wiper stuck on Citroen Jumper 2 . And to correct this, we will first try to figure out why the wipers on your Citroen Jumper 2 remain stuck and, secondly, how to unblock them.
Why does the wiper of my Citroen Jumper 2 stay stuck?
So we will begin our content page with the reasons of the stuck wipers of your Citroen Jumper 2 . First of all we will focus on the front wipers and in a second time on the rear wiper.
Why are the front wipers on my Citroen Jumper 2 stuck in up or down position?
We will proceed through one by one the different complications that can trigger the front wipers of your Citroen Jumper 2 to get stuck :
- One of the most common motives of front wipers getting stuck on your Citroen Jumper 2 is associated with the engine that drives them, in fact, these engines can, with time, lose power, and eventually need to be changed. You should notice before the total blockage of your windshield wipers that they work much slower.
- Less common, but it can still happen, is that your front wiper blades are blocked as a result of an object that prevents the blades from functioning, take a look up to the axis of the blades.
- If it is a lack of lubrication, you will locate that your front wipers are going slower, check fairly quickly the trigger of the problems or else the engines will be forced and damaged.
- It is possible that the front wipers of your Citroen Jumper 2 may not function as a result of a faulty comodo. To check this, you need to disconnect the output wires and connect them together, if the wipers are functioning, the comodo is responsible for the problem.
- Finally, last possibility, the front wipers of your Citroen Jumper 2 are blocked as a result of a power failure, so you will have to check two auto parts, the relay and the fuse.
Why is the rear window wiper on my Citroen Jumper 2 stuck?
Concerning the stuck rear window wiper of your Citroen Jumper 2 , the roots of your problems are more or less the same. Although there is only one wiper blade at the rear of your motor vehicle, there are still some dedicated auto parts that can trigger complications only on the rear windshield of your Citroen Jumper 2. So, remember to perform the same inspections as seen in the previous component of this content page.
What can I do to unlock the wiper on my Citroen Jumper 2?
At last, to do this second part, we will see what solutions are available to you to make sure that the wipers on your Citroen Jumper 2 are unlocked and that they function properly again.
How to unlock the wipers of my Citroen Jumper 2?
Whether it is for the front windshield wipers or the rear windshield wiper, the solutions will be the same and we will highlight them one by one in this component, it is up to you to adapt them to the component that concerns you. If you have other blocking complications such as a fuel door stuck on Citroen Jumper 2, do not hesitate to seek advice from our article on this problem.
- In such a case, you will have to locate the engine, then disconnect the power cables of this one (take care there must be several of them associated with the different speeds of sweeping), then remove the brushes and the linkage. At last, you will have to unscrew these anchoring points which are generally fixed on silentblocks and reassemble a new wiper motor on your Citroen Jumper 2
- In this scenario, it will be quite simple but expensive to change your commodo, the component generally costs around 200€, once tested you will be able to disassemble your commodo by removing the cover from the back of the steering wheel then disconnecting it and removing it with the fixing screws, you will just have to reassemble the new one.
- Citroen Jumper 2 wiper blocked caused by a power failure: In this last scenario, you will have to locate the source of the failure (fuse or relay) and replace the faulty component
.
.
To discover more tips on the Citroen Jumper 2, take a look at the Citroen Jumper 2 category.
