Whether you feel you can’t see properly after dark, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Despite the fact this adjustment may look easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple realignment, and in this article, we will discover how to adjust the low beam lights of your Citroen Jumper 2? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Citroen Jumper 2.
Why adjust the low beam lights of your Citroen Jumper 2?
So let’s commence our article with the benefit of adjusting the low beam lights of your Citroen Jumper 2. For a lot of people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not automatically the case and verifying this setting, either because the low beams of your Citroen Jumper 2 are not illuminating well, or because you have the sense that they are too low or too powerful is a good idea .
Adjusting the low beam of your Citroen Jumper 2 for safety is a good idea.
To begin, the adjusting of the dipped headlights of an Citroen Jumper 2 must be done for a basic safety cause. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the route, or to predict a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself in danger. It is subsequently fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Citroen Jumper 2 for law motives
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Citroen Jumper 2?
We will now go forward to the section that interests you the more in this article, how to adjust the low beams of his Citroen Jumper 2? This setting may appear to be a bit complex, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Citroen Jumper 2
Firstly, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Citroen Jumper 2
Once your vehicle is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the simple steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Citroen Jumper 2 (they are commonly marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the low beam setting of your Citroen Jumper 2 is consistent on the road, do not hesitate to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Citroen Jumper 2, please browse our article on this subject.
To discover more tips on the Citroen Jumper 2, take a look at the Citroen Jumper 2 category.
