Modern cars are more and more built with technology and nevertheless this brings us comfort, we however also undergo the disadvantages. Most of us are uncomfortable with anything electrical on our Subaru Outback, let alone going near the fuses on it. Unfortunately, summers are getting hotter and hotter, and some features like air conditioning are indispensable, so an air conditioning failure will undoubtedly effect the comfort of your car. In this post, we will try to help you to fix your fuse problems and especially to locate the turn signal fuse on your Subaru Outback. To do this, first, we will find out in which scenarios it may be important to change the turn indicator fuse on your Subaru Outback, then where is the turn signal fuse on Subaru Outback .


Why change blinker fuses on Subaru Outback?

So let’s start our article on the location of theblinker fuse of your Subaru Outback by the interest of changing it. You may possibly feel like your fuse is blown but you are not sure. Obviously, if your turn signal does not work on Subaru Outback anymore, if you have already check that the bulb isn’t blown, it is highly possible that the fuse is the cause. You should note that a fuse acts as a safety unit to prevent overvoltage on your Subaru Outback . It will be a resistor, of a filament, more or less thick, which will let pass a certain tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can check them and verify that the filament is still intact with a very easy visual check. Generally, you will want to change the turn signal fuse of a Subaru Outback when it doesn’t work anymore for no apparent cause .

Where is the turn signal fuse on Subaru Outback?

We will now look for where the blinker fuse on your Subaru Outback is. The turn indicators are linked to several electronic elements and there may be several fuses linked to it on your motor vehicle based on the year and options it has. On the other hand, furthermore to the fuses, there is also a relay that controls the solve operation of your air conditioning. We will one after the other help you locate the fuse and turn signal relay on your Subaru Outback .

Replacement of the internal turning indicator fuses of your Subaru Outback

We will first concentrate on the internal fuses of your Subaru Outback’s turn signals. For this you will have to go to the fuse box of your car . If you can’t locate it, please note that it is close to your steering wheel, you will locate its exact position thanks to the manual of your Subaru Outback.

  • Read the instruction manual on the cover of the fuse box to locate the turn signal fuse(s) of your Subaru Outback , check all the fuses with the word “lights” in their names.
  • Remove the turn signal fuse(s) carefully with pliers and check the condition of the filament.
  • If one of them fails, change it with a new fuse. As a last solution, you can take your car to your auto technician so that he can take a closer look at the cause of your problem.
  • After you change the turn indicator fuse in your motor vehicle, reassemble and test your lights.

Replacement of the turn signal fuse relay of your Subaru Outback

Finally, we will now find out how to check the status of the blinker relay in your motor vehicle. To do this, you will need to go to your engine unit compartment side:

  • Open the fuse box of your Subaru Outback, it’s close to your battery under a plastic cover.
  • Verify the inside of the cover for the position of the turn signal relay, or check your instruction manual if you can’t find it. This is in most cases the air conditioning compressor relay.
  • Reverse the relay with another relay to test your turning lights, or change it with a new one

You now know how to find the turn signal fuse of your motor vehicle , if you are looking for other fuses like the starter fuse on Subaru Outback, or the horn fuse, do not think twice to consult our web content dedicated to these fuses.

If you need more guides on the Subaru Outback, go to our Subaru Outback category.