Modern cars are progressively more equipped with technology and although this brings us comfort, we unfortunately also suffer the drawbacks. The majority of us are not comfortable with anything electrical on our Chrysler Town & Country, let alone going near the fuses on it. In this article, we will try to help you to resolve your fuse problems and specifically to find the fuse of the parking lights on your Chrysler Town & Country. To do this, first, we will find out in which situations it can be important to replace the fuse of the parking lights of your Chrysler Town & Country, then where is the fuse of the parking lights of your Chrysler Town & Country .
Why replace the parking light fuse on Chrysler Town & Country?
.
So let’s start our content page on the location of the parking light fuse of your Chrysler Town & Country by the interest of changing it. You may have the impression that your fuse is blown but you are not sure. If you can no longer use your car’s night lights, it is very possible that the fuse is the trigger. It is essential to know that a fuse acts as a security device to prevent overvoltage on your Chrysler Town & Country . It will be a resistor, of a filament, more or less thick, which will let complete a certain tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can check them and check that the filament is still undamaged with a basic visual check. Generally speaking, one will want to replace the fuse of the parking lights of a Chrysler Town & Country when they don’t work anymore without reason . If your battery is functioning properly, it may be the fuse that is producing your problem.
Where is the fuse for the parking lights on Chrysler Town & Country?
.
We will now look for the fuse for the parking-lights in your Chrysler Town & Country. The fuse is generally a 15 amp blue fuse. However, there is a fuse and a relay that controls the proper operation of your parking lights. We will take it in turns to help you to find the fuse for the parking lights of your Chrysler Town & Country .
Replacement of the inner fuse of the parking lights of your Chrysler Town & Country
.
We will first concentrate on the inner fuse of your Chrysler Town & Country’s parking lights. For this you will have to go to the fuse box of your motor vehicle . If you can’t find it, know that it is close to your steering wheel, you will find its exact position thanks to the guidebook of your Chrysler Town & Country.
- Go through the manual on the cover of the fuse box to find the parking light fuse of your Chrysler Town & Country , it should be mentioned under the name “parking lights” .
- Take out the fuse cautiously with pliers and check the condition of the filament.
- If it is faulty, replace it with a new fuse, in any other case go to the last section of this content page and check the power supply to your parking lights. As a last solution, you can take your vehicle to your mechanic so that he can take a closer check out the trigger of your problem.
- After you replace your car’s parking-light fuse, reassemble it and test your lights.
Replacing the relay fuse of the parking-light fuse of your Chrysler Town & Country
Finally, we will now check out how to check the status of your car’s parking-light relay. To do this, you will need to go to your engine compartment side:
- Open the fuse box of your Chrysler Town & Country, it’s near your battery under a plastic cover.
- Check the inside of the cache for the position of the parking light relay, or your instruction manual if you can’t find it.
- Reverse the relay with another relay to test your parking lights, or replace it with a new one
You now know how to find the fuse of the night lights of your motor vehicle , if you are looking for other fuses like the starter fuse on Chrysler Town & Country, or the car radio fuse, do not hesitate to consult our articles dedicated to these fuses.
To find more tips on the Chrysler Town & Country, take a look at the Chrysler Town & Country category.
