Modern cars are more and more pre-loaded with technology and although this provides us comfort, we sadly also go through the cons. Most of us are not comfortable with anything electrical on our Chevrolet Cobalt, let alone going near the fuses on it. In this post, we will try to help you to resolve your fuse problems and specifically to discover the fuse of the parking lights on your Chevrolet Cobalt. To get this done, first, we will find out in which scenarios it can be significant to change the fuse of the parking lights of your Chevrolet Cobalt, then where is the fuse of the parking lights of your Chevrolet Cobalt .
Why change the parking light fuse on Chevrolet Cobalt?
.
So let’s start our article content on the location of the parking light fuse of your Chevrolet Cobalt by the benefit of changing it. You may have the impression that your fuse is blown but you are not sure. If you can no longer use your car’s night lights, it is highly possible that the fuse is the cause. It is important to know that a fuse works as a security device to prevent overvoltage on your Chevrolet Cobalt . It will be a resistor, of a filament, more or less thick, which will let complete a certain tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can check them and check that the filament is still undamaged with a simple visual check. Generally speaking, one will want to change the fuse of the parking lights of a Chevrolet Cobalt when they don’t work anymore without cause . If your battery is functioning properly, it might be the fuse that is leading to your issue.
Where is the fuse for the parking lights on Chevrolet Cobalt?
.
We will now search for the fuse for the parking-lights in your Chevrolet Cobalt. The fuse is generally a 15 amp blue fuse. However, there is a fuse and a relay that controls the proper procedure of your parking lights. We will take it in turns to help you to discover the fuse for the parking lights of your Chevrolet Cobalt .
Replacement of the inner fuse of the parking lights of your Chevrolet Cobalt
.
We will first focus on the inner fuse of your Chevrolet Cobalt’s parking lights. To do this you will have to go to the fuse box of your car . If you can’t discover it, know that it is close to your steering wheel, you will discover its exact location thanks to the instruction manual of your Chevrolet Cobalt.
- Go through the instruction on the cover of the fuse box to discover the parking light fuse of your Chevrolet Cobalt , it should be mentioned under the name “parking lights” .
- Remove the fuse attentively with pliers and check the condition of the filament.
- If it is defective, change it with a new fuse, in any other case go to the last section of this article content and check the power supply to your parking lights. As a last solution, you can take your car to your mechanic so that he can take a closer check out the cause of your issue.
- After you change your car’s parking-light fuse, reassemble it and test your lights.
Replacing the relay fuse of the parking-light fuse of your Chevrolet Cobalt
Finally, we will now check out how to check the status of your car’s parking-light relay. To get this done, you will need to go to your engine compartment side:
- Open the fuse box of your Chevrolet Cobalt, it’s near your battery under a plastic cover.
- Check the inside of the cache for the location of the parking light relay, or your instruction manual if you can’t find it.
- Reverse the relay with another relay to test your parking lights, or change it with a new one
You now know how to discover the fuse of the night lights of your car , if you are in search of other fuses like the starter fuse on Chevrolet Cobalt, or the car radio fuse, do not hesitate to seek advice from our web content dedicated to these fuses.
In the event that you have any further questions about the Chevrolet Cobalt, do not hesitate to consult our Chevrolet Cobalt category.
