Modern cars are increasingly more equipped with technology and although this provides us comfort, we sadly also go through the cons. Most of us are not comfortable with anything electrical on our Ford Puma, let alone going near the fuses on it. In this post, we will try to help you to solve your fuse problems and especially to locate the fuse of the airbag on your Ford Puma. To achieve this, first, we will find out in which situations it can be significant to change the fuse of the airbag of your Ford Puma, then where is the fuse of the airbag of your Ford Puma .
Why change the airbag fuse on Ford Puma?
.
So let’s start our article on the location of the airbag fuse of your Ford Puma by the interest of changing it. You may have the impression that your fuse is blown but you are not sure. If you discover an airbag light warning on your dash, it is extremely possible that the fuse is the cause. It is necessary to know that a fuse works as a security unit to prevent overvoltage on your Ford Puma . It will be a resistor, of a filament, more or less thick, which will let complete a certain tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can verify them and verify that the filament is still intact with a basic visual verify. In general, one will want to change the fuse of the airbag of a Ford Puma when they don’t function anymore without cause . If your battery is functioning properly, it might be the fuse that is leading to your problem.
Where is the fuse for the airbag on Ford Puma?
.
We will now search for the fuse for the airbag in your Ford Puma. The fuse is generally a 15 amp blue fuse. Nevertheless, there is a fuse and a relay that regulates the proper procedure of your airbag. We will take it in turns to help you to locate the fuse for the airbag of your Ford Puma .
Replacement of the inner fuse of the airbag of your Ford Puma
.
We will first concentrate on the inner fuse of your Ford Puma’s airbag. For this you will have to go to the fuse box of your car . If you can’t locate it, know that it is close to your steering wheel, you will locate its exact location thanks to the instruction manual of your Ford Puma.
- Read the instruction on the cover of the fuse box to locate the airbag of your Ford Puma , it should be noted under the name “airbag” .
- Remove the fuse cautiously with pliers and verify the state of the filament.
- If it is defective, replace it with a new fuse, otherwise go to the last part of this article and verify the power supply to your airbag. As a last remedy, you can take your car to your technician so that he can take a closer check out the cause of your problem.
- After you change your car’s airbag fuse, reassemble it and test your lights.
Replacing the relay fuse of the airbag fuse of your Ford Puma
Finally, we will now check out how to verify the status of your car’s airbag relay. To achieve this, you will need to go to your engine compartment side:
- Open the fuse box of your Ford Puma, it’s near your battery under a plastic cover.
- Check the inside of the cache for the location of the airbag relay, or your instruction manual if you can’t find it.
- Reverse the relay with another relay to test your parking lights, or replace it with a new one
You now know how to locate the fuse of the airbag of your car , if you are in search of other fuses like the starter fuse on Ford Puma, or the car radio fuse Ford Puma, do not hesitate to consult our content articles dedicated to these fuses.
If you have any further questions about the Ford Puma, do not hesitate to consult our Ford Puma category.
