The safety of a car is very important. Whether or not the Peugeot 306 are financial holes, certain routine service works are indispensable. Today we will explain to you when to change the brake discs of your Peugeot 306? To accomplish this, to begin with, we will discover what the brake discs of your car are used for, then, when to change the brake discs of your Peugeot 306, and, finally, how to replace them with new ones.
Benefit of the brake discs of a Peugeot 306
We begin our content by detailing what the brake discs of a Peugeot 306 are used for, it will enable you to discover why it is essential to make sure that they are constantly in good working order.
Brake discs are the most important component of your braking system. Indeed, braking on an Peugeot 306 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is placed on your wheel. When the brake pads will pinch the discs which will bring about your Peugeot 306 to brake.
When to change the brake discs of a Peugeot 306?
We will now move on to the section that most certainly attracts you to this content page, namely, when changing the brake discs of a Peugeot 306? How we described it to you just before, the brake discs and pads work in osmosis, however these two elements are wearing parts and they will, over time and specifically the friction when braking wears out and loses braking power. We will now highlight the different ways to know when to replace them:
- We consider that in general the brake discs should be changed every 80, 000 – 100, 000 km on a Peugeot 306 , however it is essential to know that based on your driving style and the type of journey this can vary substantially. In truth, if you specifically drive on the motorway and your brakes are only slightly used, this amount can increase, conversely, if you only drive in built-up areas, it can decrease.
- A basic and good method to identify the condition of the brake discs on your car is during the technical inspection. In truth this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
- A very easy visual method to know when to change the brake discs on your Peugeot 306 is to remove the wheels after the car has been set on stands. Once taken out, you will have the ability to access your discs and check their condition. If they have any big scratches or deformations you will have to change them. Otherwise the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Peugeot 306?
Finally, to end this content page we will fairly quickly describe how to change the brake discs of your Peugeot 306. You must know that if you change the brake discs of your car, you will absolutely have to change the brake pads of your Peugeot 306, don’t hesitate to seek advice from our content page which teaches you how to make this change.
As far as changing discs is concerned, here are the most important steps to stick to:
- Put your Peugeot 306 on stands, take off the wheels you want to action on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
- Using large Torx bits, take out the two nuts that lock the upper component of your brake caliper, take out it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you might need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper component of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
If you wish more guides on the Peugeot 306, go to our Peugeot 306 category.
