The safety of a motor vehicle is important. Even if the Ford Edge are financial holes, certain maintenance acts are vital. Today we will explain to you when to change the brake discs of your Ford Edge? To achieve this, to begin with, we will discover what the brake discs of your car are used for, then, when to change the brake discs of your Ford Edge, and, finally, how to change them with new ones.
Benefit of the brake discs of a Ford Edge
We start our article content by explaining what the brake discs of a Ford Edge are used for, it will enable you to figure out why it is important to ensure that that they are always in good working order.
Brake discs are the most important component of your braking system. In fact, braking on an Ford Edge is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is installed on your wheel. When the brake pads will pinch the discs which will trigger your Ford Edge to brake.
When to change the brake discs of a Ford Edge?
We will now proceed to the section that most certainly attracts you to this article, namely, when replacing the brake discs of a Ford Edge? How we described it to you just before, the brake discs and pads work in osmosis, however these two elements are wearing parts and they will, with time and specifically the friction when braking wears out and loses braking power. We will now detail the different solutions to know when to change them:
- We consider that in general the brake discs should be changed every 80, 000 – 100, 000 km on a Ford Edge , however it is important to know that dependent on your driving style and the type of journey this can change significantly. Indeed, if you principally drive on the motorway and your brakes are only slightly used, this value can increase, alternatively, if you only drive in built-up areas, it can reduce.
- A simple and successful way to identify the state of the brake discs on your motor vehicle is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
- A very easy visual way to know when to change the brake discs on your Ford Edge is to remove the wheels after the vehicle has been set on stands. Once removed, you will have the ability to access your discs and verify their state. If they have any big scratches or deformations you will have to change them. In any other case the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Ford Edge?
Finally, to end this article we will fairly quickly explain how to change the brake discs of your Ford Edge. You must know that if you change the brake discs of your car, you will absolutely have to change the brake pads of your Ford Edge, don’t think twice to consult our article which teaches you how to make this change.
As far as changing discs is concerned, here are the most important steps to follow:
- Put your Ford Edge on stands, take off the wheels you want to action on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
- Using large Torx bits, take out the two nuts that lock the upper component of your brake caliper, take out it.
- Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper component of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
In the event that you have any additional questions about the Ford Edge, do not hesitate to consult our Ford Edge category.
