The safety of a motor vehicle is important. Even if the Ford Focus are economic holes, certain routine service works are crucial. In this article we will explain to you when to replace the brake discs of your Ford Focus? To do this, to begin with, we will find out what the brake discs of your car are used for, then, when to replace the brake discs of your Ford Focus, and, finally, how to replace them with new ones.
Interest of the brake discs of a Ford Focus
We begin our content page by explaining what the brake discs of a Ford Focus are used for, it will allow you to figure out why it is necessary to make certain that they are constantly in good functioning order.
Brake discs are the main part of your braking system. In actual fact, braking on an Ford Focus is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is placed on your wheel. When the brake pads will pinch the discs which will cause your Ford Focus to brake.
When to replace the brake discs of a Ford Focus?
We will now move on to the part that undoubtedly attracts you to this article, namely, when replacing the brake discs of a Ford Focus? How we revealed it to you just before, the brake discs and pads work in osmosis, however these two components are wearing auto parts and they will, over time and especially the friction when braking wears out and loses braking power. We will now outline the different solutions to know when to replace them:
- We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a Ford Focus , however it is necessary to know that dependent on your driving style and the type of journey this can change considerably. Indeed, if you specifically drive on the motorway and your brakes are only slightly used, this amount can increase, alternatively, if you only drive in built-up areas, it can decrease.
- A simple and good method to find out the state of the brake discs on your motor vehicle is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
- A basic visual method to know when to replace the brake discs on your Ford Focus is to remove the wheels after the car has been set on stands. Once taken off, you will be able to access your discs and check their state. If they have any big scratches or deformations you will have to replace them. Otherwise the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to replace the brake discs on your Ford Focus?
Finally, to end this article we will fairly quickly explain how to replace the brake discs of your Ford Focus. You must know that if you replace the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Ford Focus, don’t hesitate to seek advice from our article which teaches you how to make this replace.
As far as changing discs is concerned, here are the main steps to stick to:
- Put your Ford Focus on stands, take off the wheels you want to work on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
- Using large Torx bits, remove the two nuts that lock the upper part of your brake caliper, remove it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper part of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
Whenever you have any additional questions about the Ford Focus, do not hesitate to consult our Ford Focus category.
