The safety of a motor vehicle is essential. Regardless if the Fiat 500 X are financial holes, certain routine service acts are vital. In this article we will explain to you when to change the brake discs of your Fiat 500 X? To do this, to begin with, we will see what the brake discs of your motor vehicle are used for, then, when to change the brake discs of your Fiat 500 X, and, finally, how to change them with new ones.
Benefit of the brake discs of a Fiat 500 X
We start our content page by explaining what the brake discs of a Fiat 500 X are used for, it will allow you to discover why it is essential to make certain that they are constantly in good functioning conditions.
Brake discs are the main part of your braking system. In truth, braking on an Fiat 500 X is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is placed on your wheel. When the brake pads will pinch the discs which will bring about your Fiat 500 X to brake.
When to change the brake discs of a Fiat 500 X?
We will now move on to the part that undoubtedly attracts you to this article, namely, when replacing the brake discs of a Fiat 500 X? How we revealed it to you just before, the brake discs and pads work in osmosis, however these two elements are wearing auto parts and they will, after some time and especially the friction when braking wears out and loses braking power. We will now highlight the different techniques to know when to change them:
- We consider that in general the brake discs should be changed every 80, 000 – 100, 000 km on a Fiat 500 X , however it is essential to know that according to your driving style and the type of journey this can change substantially. In fact, if you specifically drive on the motorway and your brakes are only slightly used, this amount can increase, on the other hand, if you only drive in built-up areas, it can reduce.
- A basic and good method to find out the condition of the brake discs on your motor vehicle is during the technical inspection. In fact this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
- A basic visual method to know when to change the brake discs on your Fiat 500 X is to remove the wheels after the car has been set on stands. Once removed, you will be able to access your discs and check their condition. If they have any big scratches or deformations you will have to change them. Otherwise the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Fiat 500 X?
Finally, to conclude this article we will fairly quickly describe how to change the brake discs of your Fiat 500 X. You must know that if you change the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Fiat 500 X, don’t hesitate to consult our article which points out you how to make this change.
As far as changing discs is concerned, here are the main steps to follow:
- Put your Fiat 500 X on stands, take off the wheels you want to act on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
- Using large Torx bits, take out the two nuts that lock the upper part of your brake caliper, take out it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper part of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
To find more tips on the Fiat 500 X, take a look at the Fiat 500 X category.
